Sipura 2002/3000
Total views: 517
Word Count: 349
LED Indicators:
ACT
The ACT LED should stay solid and blink occasionally to indicate network activity
Status
The Status LED will turn on when power is applied and should turn off
after 10-20 seconds. When the phone handset is picked up the Status LED
will turn solid until the phone is hung up again.
Using the ATA:
Placing a call
Pick up the handset
Dial the desired number
Receiving a phone call
When the phone rings pick up the handset and begin speaking. To end the call, hang up the phone.
Using call waiting
If a call comes in while you are on a call and you elect to take it,
either press the switch hook on the phone or the flash button to switch
lines. This will put the first call on hold and automatically answer
the second call. To place the second caller on hold and return to the
first simply press the switch hook or flash button again.
Transferring a call
Press the switch hook or flash button to place the party on hold
Listen for three short tones followed by a dial tone
Dialer the number to which you would like to transfer the caller
Stay on the line until the called number answers
Announce the call to the third party
Press the switch hook or flash button to add the held party to the call
Hang up to connect the two parties
Placing a call on hold
3-way calling
Press the switch hook or flash button to place the party on hold
Dial the third party number
When the third party answering you may to them while the other party is on hold
To conference the calls press the switch hook or flash button again
/voip-hardware/hardware-companies/sipura/sipura-2002-3000.html
About the Author
Bill Jackson
Rating: Not yet rated
Comments
No comments posted.
Add Comment
You do not have permission to comment. If you log in, you may be able to comment.
|